Ls avenger. I have three words,just for you.
"FUCK YOU PUNK"
Now,if there is anyone else out there that can help it would be much appreciated.
Printable View
Ls avenger. I have three words,just for you.
"FUCK YOU PUNK"
Now,if there is anyone else out there that can help it would be much appreciated.
You're not going to get his information from anyone on this board who has it because it's not public information nor does he want it to be. Emailing Endyn is THE best way for someone who's not his customer already. I'm sure the rest of the folks on the board will agree.
Hey twitty, relax. I had the mods done and contact with ENDYN was done just the way the gentlemen above me described it.
Wow that was really clever.
You come across as quite intelligent with the mixed-caps name (what are you, 14 ?), all of two posts to your name, and a real dipshit question which could have been answered inside of 30 seconds had you bothered to do a search.
Had you bothered to click on the hyperlink in my note, you'd see that it works quite well, there is another company called endyn which has nothing to do with Hondas.
In case you're wondering, in the past I had many helpful and informative emails and phone conversations with the Man, himself. That kind of support is unheard of in any kind of market. Then they did some work on my JRSC, and my car has a number of parts on it recommended on their site.
I swear, this sport is going to the dogs with clueless douchebags like Jimmy on the scene. God help us all if a f*cking moron like you has a Type R.
Come at Endyn with that attitude, Jimmy-boy, and see how far you get.
[This message has been edited by The LS Avenger (edited December 11, 2000).]
Cant you just feel the Holiday spirit just oooooozing inside this topic. http://www.hostboard.com/ubb/biggrin.gif
This is what I got in reply:
"We're in Ft. Worth, TX. We do not do counter sales, or installs.
LW"
Sounds like you didn't pass the twit test http://www.hostboard.com/ubb/smile.gif
That's funny. http://www.hostboard.com/ubb/wink.gif
Whatever else you may think about Larry and Endyn, you have to admit they have a justifiable need to do a lot of "gatekeeping".
pureGSR: Don't give up. If you really want them to do work for you and are serious about it, I'm sure you can get through. Asking questions that are already answered on their website is probably a bad idea!
Greg
They answered your question and I don't see what you're upset about. I know that their facility isn't open to the public. Maybe they assumed that you wanted to stop in to chat or something?
I can understand them not giving out their address to everyone... If they did I could see myself finding a reason to drive from atlanta to texas and to make a stop at Endyn just to meet Larry and see the place, and his superharged hondas. I'm sure I'm not the only one.
A while back, I emailed Larry about getting some of his pistons and basically he wouldn't sell them to me since I was just gonna throw them in "bolt on" style because my engine was apart for repair. He recommended I get generic pistons. So I didn't pass the "twit test".
ON another topic, I asked for places in LA that do tuning. One recommended was Atomicperformance.
And on their site, they say they sell Endyn products. So perhaps you could try that route.
Personally, I've bought the bosch pump, and the stepper pulley from Endyn. I suppose the distrubution of those rollerwave pistons might be something more restricted.
peyomp do you mean by "bolt in style" not honing the cylinder walls?
Yeah I did if I could get them in stock bore. I also didn't want to touch any of the rest of the engine to suit the pistons. And I wanted them at a particular compression ratio.
i guess that would be a problem cuz he only has em in 81.5 overbore.
That wasn't the problem, cause I said I wanted those if I couldn't get stock bore ones.
yea...
I read everything on their website already...
lots of things I don't understand though ....
The thing is that I didn't ask any stupid question; I just asked them where they are located, that's it.
well see you answered it all right there. you said, I want stock bore. well okay you don't have those.. gimme the other ones you have, yeah those .5mm over ones.
I think larry wants informed people buying the products not just people buying the stuff cause they heard its good. hence the reason for the website and bbs. people are supposed to learn, and make the right decisions from there.
They have stated many times that the reason they make the oversize pistons is so people will achieve the proper cylinder finish for the right clearances.
If I was selling something and a customer told me he wasn't going to use it correctly, I wouldn't sell it either. Why be involved in something that's doomed from the beginning?
On compression, I think Endyn knows more about the numbers that work best for each engine. I suppose that the customer's not always right in some cases.
I totally agree with Larry not selling me those pistons. I had the wrong attitude and it all worked out in the end. I wouldn't have sold them to me either, cause I sounded like a twit.
How many Endyn mod JRSC people are there? Did you guys have to send everything down to Texas?
One of my friends here in the town I live in has the endyn mods done to his d16, and its real nice.. I was impressed.. I took a real close look at the rollerwaves and man, what a work of art.. jeesh. Ive gotta get another b16 to get it worked.. in anticipation of boooost..mmmm..
I have some kid here where I live that thinks hes the shit with his 20psi eclipes gs-t..
He stops by my house last night acting all stupid..trash talking etc.. fawkin idiot burned the tires all the way down my street pissin my neighbors off and shit..grrr... I cannot wait to set him silent..(at the track of course)